Burglarproof windows at the jeweler:
starting with RC4.

RC2 Fenster oder RC3 Fenster?
RC1 Fenster - 0 min.

RC1 windows:

as a matter of principle, do not offer any burglary protection.
RC2 Fenster - 1-3 min.

RC2-RC3 windows:

for jewelers normally not adequate, based on the high value of the gemstones.
RC3 und RC4 Fenster - 5-10min.

RC4 - RC6 windows:

effective up to perfect burglary protection for jewelers, depending on the hazard situation. Approx. 10 to 20 minutes resistance when equipped with SILATEC P6B or P8B safety glass.

Our recommendation for jewelers:

01  |  

Burglarproof windows starting at class RC4

Plus glass type SILATEC P6B/EH1. For very valuable exhibits RC5 or RC6 windows and glass of the type SILATEC P8B/EH3. Be careful when using glass specified by the standard: The test standard for burglarproof windows does actually not test the glass. The specified glasses are quickly broken and they represent the decisive weak point! This is why we produce walls of glass, which have already prevented 5000 burglaries in jeweler display windows during the last 40 years. A priceless treasure trove of experience from the criminal practice. Please take advantage of it.

02  |  

Fix glazings for windows

Fixed glazing cannot be opened and this represents of course a large advantage for the burglary protection.

03  |  

“Safety glass” that does deserve this name.

Because glass is the decisive weak point, which is attacked in almost all cases. Install at least SILATEC P6B/EH1, or even better SILATEC P8B/EH3

04  |  

Keep the glass protrusion as large as possible:

The further the glass protrudes into the frame, the safer will it be held. We recommend approx. 25 mm protrusion especially for floor-deep and large display windows. This offer already significantly more burglary protection as the often used 15 mm, for example against “pressing”.

05  |  

Sealing.

A sealing seam made of “adhering” silicone is clearly safer than a rubber lip seal, which is only pressed between glass and frame to keep water out. The sealing keeps the pane solidly in the frame, inside and outside.

06  |  

Outside or inside installation?

Both are possible, it depends. The installation from the outside is in most cases recommended for large safety panes because the glass must be replaced as soon as possible after a burglary attempt. This is normally easier from the outside, for example, the shop facilities are not in the way. However, caution: The safety glass pane must be especially secured when installed from the outside, to ensure that burglars do not simply dismantle the pane. How does that work? Inquire about it. We are pleased to be available for consultations.

ArmoredSILATEC glass

SILATEC:
The special
display window glass.

Armored glass:

Large thickness
High weight
Green tint
Low safety
No UV protection
SILATEC glass:

extremely thin
extremely light weight
no cloudiness
20 times safer
full UV protection

Heavy. Thick. Green. And traditional armored glass is even dramatically more unsafe than SILATEC safety glass: about 20 times! The valuable exhibits are safe behind SILATEC glass, based on the crystal clear glass they are displayed in a natural, non-cloudy light and they are protected against fading based on the hundred percent UV filter. Sensitive material such a leather, fabrics or wood maintain their color.

Jewelry theft?
Nice try!

Bulgari in Rome:
Our glass
passed the hardness test!

An excerpt of the jewelers
that put their trust in us

SILATEC Panikglas bestellen
TÜV
Order directly
from me
I am pleased to be available for consultations
+49 8171-9281 0
Write an email
You will receive our answer in a few hours

Of course, the individual local conditions must be included and must be coordinated early with your insurance company. We would be pleased to do this for you and we will provide consultations for you at any time.


Other products

ISOVdSTÜV SüdBeschussamt UlmBeschussamt MünchenG7 GermanyG20 GermanyTU BerlinIfTTU DresdenUniviersität SiegeniwfPfB